亚洲欧美国产精品专区久久,一卡一卡三卡四卡不卡乱码在线观看,无码国产伦一区二区三区视频,疯狂 喷水爽www噜噜噜,国产精品日老太婆

現在，電梯是非常普遍的,也是經常被大家使用的,但是大家對于電梯門套的了解少的有點可憐,例如：石塑電梯門套的做法是怎么樣的，很多人就會搖搖頭不知道了。
Now, the elevator is very common, is also often used by everyone, but everyone's understanding to the elevator door cover less a bit poor, such as: stone what is the model of elevator door cover, a lot of people will don't know the shook his head.

下面就給大家分享一下石塑電梯門套的做法

Below to share to everyone in stone elevator door cover

第一、物料的準備:線條、泡棉膠、硅酮膠、切割鋸、膠槍、紅外線儀器等。
First, material: line, foam rubber, silicone rubber, cutting saw, glue guns, infrared instruments, etc.
第二、結構墻體基面清理干凈表面沒有油污、浮塵、并檢驗墻面平整度和垂直度。

Second, the structure wall base clean surface oil pollution, dust, and no inspection wall roughness and verticality.

超差部分應剔鑿或用水泥砂漿修補缺陷,加固找平,方能施工,在墻面找出水平線、垂直控制線。

Out-of-tolerance part should be picked chisel or to repair the defect with cement mortar, reinforcement leveling, before construction, the wall to find a horizontal line, perpendicular line.

第三、電梯門套切割鋸采用45度角對線條切割并對角拼接檢查平整度,線條背面點粘硅酮膠。

Third, elevator door cover with 45 degree Angle to the line cutting cutting saws and diagonal stitching inspection flatness, lines on the back of the silicone rubber.

第四、將線條安裝到位,壓實。并用夾具國定,將對角處縫隙打玻璃膠填滿抹平,將線條與墻的間隙打膠抹平。
Fourth, the line is installed, compaction. And fixture national will play glass glue to fill diagonal crevice, the clearance between the wall and the line with glue.

第五、整體完工。

Fifth, the overall completion.